Difference between revisions of "Radioear 3045 specifications"

From biophysics
Jump to navigation Jump to search
Line 5: Line 5:
 
RadioEar 3045 Adult audiometric headset.
 
RadioEar 3045 Adult audiometric headset.
 
==Specs==
 
==Specs==
Item: #8105268
+
{| class="wikitable"
Headband: HB3045
+
|-
Transducer: DD45
+
! Item
Cable length: 2 m
+
! Specification
Plug type: 30º, 2x 6.3 mm gold-plated mono jack
+
|-
 
+
| Headband
Standards: ANSI S3.6-2010; IS0389-1 1998
+
| HB3045
Earphone Receiver: Dynamic moving coil, specially built for audiometry
+
|-
Nominal Impedance: 10 ohm
+
| Transducer
Frequency Response: 100 Hz - 8 kHz
+
| DD45
Linearity: Linear up to 500 mW
+
|-
Sensitivity: Typically 106.7 dB SPL re. 20 µPa output with
+
| Cable Length
1 mW input, f=1 kHz
+
| 2 m
Harmonic Distortion: Below 1% at 120 db SPL, f=kHz
+
|-
Cable Connector: 2 terminals with 4 mm holes and 2 mm screw
+
| Plug Type
Weight Complete: 59 gram (2 oz)
+
| 30º, 2x 6.3 mm gold-plated mono jack
Environmental: RoHS compatible; Lead and nickel-free; Bio compatible
+
|-
 +
| Standards
 +
| ANSI S3.6-2010; IS0389-1 1998
 +
|-
 +
| Earphone Receiver
 +
| Dynamic moving coil, specially built for audiometry
 +
|-
 +
| Nominal Impedance
 +
| 10 ohm
 +
|-
 +
| Frequency Response
 +
| 100 Hz - 8 kHz
 +
|-
 +
| Linearity
 +
| Linear up to 500 mW
 +
|-
 +
| Sensitivity
 +
| Typically 106.7 dB SPL re. 20 µPa output with 1 mW input, f=1 kHz
 +
|-
 +
| Harmonic Distortion
 +
| Below 1% at 120 db SPL, f=kHz
 +
|-
 +
| Cable Connector
 +
| 2 terminals with 4 mm holes and 2 mm screw
 +
|-
 +
| Weight Complete
 +
| 59 gram (2 oz)
 +
|-
 +
| Environmental
 +
| RoHS compatible; Lead and nickel-free; Bio compatible
 +
|}

Revision as of 15:08, 24 November 2023

RadioEar 3045 Audiological Headphone (P4493)
DD45 frequency response with coupler
DD45 frequency response with artificial ear

Description

RadioEar 3045 Adult audiometric headset.

Specs

Item Specification
Headband HB3045
Transducer DD45
Cable Length 2 m
Plug Type 30º, 2x 6.3 mm gold-plated mono jack
Standards ANSI S3.6-2010; IS0389-1 1998
Earphone Receiver Dynamic moving coil, specially built for audiometry
Nominal Impedance 10 ohm
Frequency Response 100 Hz - 8 kHz
Linearity Linear up to 500 mW
Sensitivity Typically 106.7 dB SPL re. 20 µPa output with 1 mW input, f=1 kHz
Harmonic Distortion Below 1% at 120 db SPL, f=kHz
Cable Connector 2 terminals with 4 mm holes and 2 mm screw
Weight Complete 59 gram (2 oz)
Environmental RoHS compatible; Lead and nickel-free; Bio compatible