Difference between revisions of "Screen Trigger Device specifications"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
[[File:Screen_Trigger_Device.png|200px|Left|Screen Trigger Schematics]] | [[File:Screen_Trigger_Device.png|200px|Left|Screen Trigger Schematics]] | ||
| − | ==Components== | + | ===Components=== |
*Box: Hammond 1551 Series Black ABS Enclosure, IP54, Flanged, 50 x 35 x 20mm | *Box: Hammond 1551 Series Black ABS Enclosure, IP54, Flanged, 50 x 35 x 20mm | ||
*Power supply: 5V, 2.5A, 2-Pin Type C - EuroPlug with 2.1mm DC connector | *Power supply: 5V, 2.5A, 2-Pin Type C - EuroPlug with 2.1mm DC connector | ||
Revision as of 14:30, 20 November 2023
Description
The screen trigger device is a small optical sensor that can be mounted in the corner of a screen. It contains a photo diode with build in amplifier that senses the intensity of the screen locally. It has a BNC output that gives 0 Volt output when the screen is locally black and 5 V output when the screen is locally white. This can be used to create a digital timing signal for changes on the screen.
Design
The screen trigger devices has a TSL25xR photo sensor with build-in amplifier.
Components
- Box: Hammond 1551 Series Black ABS Enclosure, IP54, Flanged, 50 x 35 x 20mm
- Power supply: 5V, 2.5A, 2-Pin Type C - EuroPlug with 2.1mm DC connector
- Socket: Cliff Electronic Components DC10A SOCKET, PCB, DC POWER, 2.1MM, PK10
- Photo Diode: Taos TSL25xR
- Resistor: 10 kOhm
Specsheet photo diode
Speed test Screen Trigger Device
A led was connected to the output of the function generator. The led was used to illuminate the photo diode.
- The function generator signal is shown in yellow.
- The output of the screen trigger detector is shown in red.
- Risetime and falltime of the screen trigger detector is about 0.2 mSec
