Difference between revisions of "Sennheiser HDA300 specifications"
Jump to navigation
Jump to search
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
==Description== | ==Description== | ||
+ | [[File:Sennheiser_HDA300.png|thumb|Sennheiser HDA300]] | ||
The HDA 300 is a pair of closed dynamic headphones designed for use with audiometers. | The HDA 300 is a pair of closed dynamic headphones designed for use with audiometers. | ||
*High passive ambient noise attenuation | *High passive ambient noise attenuation | ||
Line 42: | Line 43: | ||
| Max. Input voltage | | Max. Input voltage | ||
| 3.5 V, < 10 min | | 3.5 V, < 10 min | ||
+ | |- | ||
+ | |Compliance | ||
+ | |IEC 60645-1, IEC 60645-2, ANSI S3.6-2010 | ||
|} | |} |
Latest revision as of 13:36, 21 November 2023
Description
The HDA 300 is a pair of closed dynamic headphones designed for use with audiometers.
- High passive ambient noise attenuation
- Equipped with two mono plugs
- Soft, replaceable ear pads
- Single-sided cable
Specification | Value |
---|---|
Connector | 2 Mono-Jacks; Green: -L, yellow: +L, red: +R, blue: -R |
Frequency response (Headphones) | 20 Hz - 20,000 Hz |
Characteristic SPL | 117dB at 1kHz, 0.5V |
Contact pressure | 8.8N ± 0.5N |
Ear coupling | circumaural |
Connection cable | approx. 2.2m |
Transducer principle | dynamic, closed |
Weight | incl. cable: 490 g |
Nominal impedance | 23 Ohm |
Load rating | 500 mW |
Max. Input voltage | 3.5 V, < 10 min |
Compliance | IEC 60645-1, IEC 60645-2, ANSI S3.6-2010 |